UAV Tools and Information

• Changing Pitot tube on the eBee X

  The pitot probe is the sensor used by the eBee X to calculate airspeed, wind and altitude. It must be kept clean and clear of obstructions to function properly. Often times, when operating an eBee X, ...

• SenseFly eBee X/Plus/RTK setup with Leica Captivate

  This guide below will provide step by step instruction on configuring an eBee X/Plus/Classic RTK setup with a Leica GS Sensor (GS16, GS18T, GS15, GS14,etc) running Leica Captivate.    Other systems wi...

• pix4D Knowledge Base

  Pix4D has a thorough knowledge base for various Pix4DMapper How-To’s.   They provide a very detailed and informative step by step instruction for functionalities and features of the software.   Please...

• senseFly Battery Care and Safety

  The following is a guide outlining the proper care and safety of senseFly eBee batteries:...

• Custom Route/Corridor Mapping mission

  This is a quick guide on planning a custom route mission for corridor/pipeline/row mapping for the eBee/eBee RTK....

• eBee X Battery Info & Flight Tips ?

  Get the Most Out of Your eBee X With This Guide to Smart Batteries and Flight Times The eBee X is an advanced fixed-wing mapping drone that relies on “smart” batteries to operate efficiently and safel...

• Customer Support Workflow and What to share with Technical Support

  In the unlikely event of an incident occurring with the eBee X, Customer support engineer will require the following information from the operator in charge for an analysis.   BBZ drone log (and missi...